NAKŁADKI

Pobierz katalog Prośba o informacje

Przegląd

NAKŁADKI

Firma Megadyne oferuje szeroką gamę powłok z poliuretanu, elastomeru, pianki PU, PCV i innych unikatowych rozwiązań: wybór odpowiedniej nakładki zależy od rodzaju zastosowania i specyficznych wymagań.
Niektóre materiały pokrywające nakładane są w czasie produkcji pasa w jednorodnej strukturze; inne natomiast są dodawane później przy użyciu różnych metod (klejenie, natryskiwanie lub procesu wulkanizacji).
Różnym powłokom odpowiadają różne właściwości, takie jak: wysokie lub niskie współczynniki tarcia, odporność na działanie wody i kwasów, elastyczność, twardość, miękkość...
Ze względu na różne właściwości pasy powlekane mogą być wykorzystywane do różnych zastosowań w przemyśle.

Skontaktuj się z naszym zespołem OEM, aby znaleźć odpowiednie dla Ciebie rozwiązanie.

Pobierz katalog

Zasięg

AVAFC 60

High-friction on  smooth and dry surfaces. Available in different colour under respecting a MOQ.

PU FISHBONE

Suitable for wet environments where friction and drainage are necessary.

PU RIBBED

Reduced contact point for conveying smooth products. Allows drain of liquids.

NP 385

For oily conveyor conditions. Contact only on top of the Noppen.

RED GRIP

Seamless alternative to Natural Rubber. Only available on MEGAFLEX.

ORANGE COVER

Cover offering high-grip, good wear, and oil resistance. Available on MEGAFLEX only. 

ORANGE NATURAL RUBBER R66

Cover is an alternative to DURATAQ™ offering a custom blended proprietary rubber which has a high CoF, and very good abrasion resistance. Only available on rubber base belts. 

GREEN MILLABLE URETHANE 40, 50, 60, 70, 85

Very good abrasion resistance with a high CoF. Commonly used in the Cable and Wire Industry.

TT60

Antistatic cover provides a soft, nonmarking, and good oil resistance surface for moving sharp, oily surface parts. Works well downline in complement to Kevlar. for higher temperature conveying.

SPONGE RUBBER ORANGE

Hi grip rubber sponge for sensitive products.

65 DURO RED NITRILE/PVC

Cover offers a blended compound feature and provides good CoF, along with good oil resistance. Only available on rubber base belts.

SUPERGRIP PETROL

Applicable for slight height compensation, low shock absorption capabilities. Improved adhesion even with moisture and dirt for incline, feed and take-away conveying applications. Seamless weldable on ML and MFX.

POLYTHAN D44

Good resistance against Ozone and UV radiation. Cut resistance makes it a good option to convey sheets and panels of wood and glass. 

MINIGRIP GREEN

Thin cover structure with very good friction in wet or dusty conditions - reduces frictional stick. Resistant to acids and oils.

LOW DURO NR R34

Non marking compound for applications requiring, high coefficient of friction. Excellent abrasion resistance. Very good tear resistance. Low hysteresis. Only available on rubber base belts.

CELLOFLEX

Highly flexible, good shock absorption. Use to move sensitive and fragile products. Better resistance than sylomer foams.

SYLOMER BLUE

10 ShA offers high dynamic load capacity for handling of lightweight, fragile items.

SYLOMER GREEN

15 ShA offers high dynamic load capacity for top pressure belts.

SYLOMER BROWN

22 ShA, offers high dynamic load capacity for moving glass.

SYLOMER YELLOW

High-dynamic load capacity for movement of light and sensitive parts.

PVC-FOIL BLUE

Good adhesion characteristics due to good CoF and smooth surface for the conveyance of paper and foils, wood and plastics. Seamless weldable on ML and MFX.

LINATEX™ RED

Cover offers high CoF, good wear resistance, good in wet conditions but poor in oil. Common used as discharge belts for use in vacuum VFFS.

APL SUPERGRIP

Cover offering high friction rough top surface, applicable for slight height compensation, low shock absorption capabilities. Improved adhesion even in case of moisture and dirt for use on lower angle incline product movement.

SUPERGRIP WHITE

Characteristics same as Supergrip petrol but less flexible. For the conveyance of food. Resistant against acids and bases.

PVC-SAW-TOOTH

FDA clear pattern for improved adhesion under wet conditions. Line contact, resistant against acids and bases.

PVC-NAPPED

Thin cover offers good CoF, even in wet conditions. Resistant to acids and oils. Formulated with FDA materials.

PVC FISHBONE

Improved CoF in wet conditions. Narrow belts may only have a single diagonalcut profile. Resistant to acids and oils. Formulated with FDA materials.

70 DURO GREY HNBR - HTG

Cover offers higher temperature applications where UV resistance is needed. Only available for 8M, H and T10 belt profiles. Only available on rubber base belts.

FAG 25 GREEN FELT

The felt provides a soft, non-marking, and good oil resistance surface for moving sharp, oily surface parts. Works well downline in complement to Kevlar. for higher temperature conveying.

RP 400 YELLOW

Cover has fine fabric texture, characteristics similar to Natural Rubber but higher abrasion resistance. 

GUMMY CORREX AMBRA PARABLOND

Cover offers high CoF and higher abrasion resistance than other Natural Rubber compounds.

BLUE GRIP

Very good wear resistance. Alternative to Natural Rubber. Only available on rubber base belts.

YELLOW GUM R14

Cover offers high CoF, very good wear resistance. Compound common used in indexing, corrugating, positioning and packaging applications. Only available on rubber base belts. 

HIGH DURO PINK NEOPRENE R25

Cover offering non-marking compound. Good friction properties and heat-resistance. Only available on rubber base belts.

LOW DURO BLACK NEOPRENE R35

Cover offering high-friction, non-marking feature. Only available on rubber base belts.

LOW DURO WHITE NEOPRENE R92

Cover offers low ShA non-marking compound, offers high CoF and good wear resistance. Formulated with FDA materials. Only available on rubber base belts.

TAN NATURAL RUBBER 40

Cover offers non marking high CoF surface. Average wear and tear and abrasion resistance.

DURATAQ™

A premium Natural Rubber compound offering a custom blended proprietary rubber which has a high CoF and very good abrasion resistance.

RED NATURAL RUBBER 40

Cover offering low durometer ShA and very good high friction. 

BLACK NEOPRENE

Cover offers high CoF and moderate abrasion/water/oil resistance in ambient temperatures.

BLUE ANTI GLAZE NATURAL RUBBER

Cover offers a high CoF and good wear resistance. Anti glazing characteristic predestined for high speed paper feeder.

HONEYCOMB

Cover offering high-friction rough top surface, applicable for slight height compensation, low shock absorption capabilities. Improved adhesion even with moisture and dirt for use on lower angle incline product movement.

NFB/NFT

NFT/NFB offers low friction for accumulation as well as low-noise benefits and is usually applied Coextrusion on base belts. In this case the min. pulley diameters indicated for each belt type and pitch are valid. Antistatic version available.

CHROME LEATHER

Cover has a roughened surface that offers very good oil / grease resistance and good cut resistance for moving sharp oily parts.

SILICONE

Cover offers high-temperature resistance, excellent grip and ease of product release, making clean-up of materials like adhesives easy. Formulated with FDA materials. 

KEVLAR® FELT

Excellent heat-resistance for high temperature applications such as aluminum extrusion 

STAGGERED SAWTOOTH

Very good CoF for gripping and incline conveying. Resistant to acids and oils.

Czy jesteś zainteresowany COVERS?

Zapytaj eksperta o dodatkowe informacje